For small series and prototyping

First printer developed by 3DCeram, the C900 FLEX gets the benefits of 15 years of know-how and optimization.
Print functional parts or small series
Ceramic printed parts have the same properties as those produced in conventional ways (moulding, machining and injection)
Lab Mode for free development
3 sizes of building platform : 100 x 300 mm, 200 x 300 mm and 300 x 300 mm
Free link technology
SAM (Small Amount of Material) option : launch a fast printing run with only 100 mL of slurry

Watch the trailer

Technical Data

Approx. Dimensions

1060 x 2250 x 2040 mm (LxPxH)

Build platform size

300 x 300 x 100 mm

Approx. Weight

1450 kg

Electrical requirements

220-240 VAC / 50Hz

Electric power

2 kW

Light source

UV Laser

Laser spot diameter

~ 35 μm

UV Wavelength

355 nm

Layer thickness

0.010 – 0.125 mm

Optimal room temperature


Maximum room temperature variation


Relative humidity


Compressed air

6 bars dry

Hybrid option


Printing Without Supports

Top-down stereolithography enables technology that can print without supports. The tray moves down as the part itself is built from the bottom-up. 3DCeram is able produce consistent parts with high precision and fine details.

The feeding of the printing material is done by a printing material is fed into a cartridge which is simply filled at the beginning of the printing cycle. It is possible to re-fill the cartridge during the printing cycle.


  • 3DCeram has a wide selection of ceramics are developed for use with the C100 EASY printer.

    The materials are able to obtain homogenous layers for maximum quality in final products. They guarantee a level of quality recognized by the most demanding industries.

  • 3Dceram offers a catalogue of ceramics developed for specific needs

    - Alumina Toughened Zirconia (ATZ)
    -Zirconia 8Y
    -Tricalcium Phosphate (TCP)
    -Fused Silica
    -Hydroxyapatite (HAP)
    -Silicon Nitride (Si3n4)
    -Aluminium Nitride (AlN)

Our Services


maintenance, phone support, mechanical & laser assistance


We support you throughout the process and train you to meet your needs from prototyping in laboratories or research centers to mass production of small parts. We offer training to master stripping supports and the free link supports.
Phone : +33 (0)5 55 04 10 90
Email : info@3dceram.com
© 2009 - 2020 Copyright 3DCeram
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram